specification control drawing thermofit devices te connectivity 300 constitution drive menlo park, ca 94025 usa title: soldersleeve* device with pre-installed lead unless otherwise specified dimensions are in millim eters. inches dimensions are between brackets. document no.: d-101-3x tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron te connectivity reserves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. dcr number: d981004 replaces: d1013x drawn by: m. foronda date: 06/15/98 prod. rev. see table doc issue: 5 scale: none size: a sheet: 1 of 1 print date: 11-may-11 if this document is printed it becomes uncontrolled . check for the latest revision materials 1. insulation sleeve: heat-shrinkable, transparent blue, radiation cross-linked polyvinylidene fluorid e. 2. solder preform with flux: solder: type sn63 per ansi-j-std-006. flux: type rol1 per ansi-j-std-004. thermal indicator: red. 3. meltable rings: thermally stabilized thermoplast ic. color:gray. 4. ground lead: raychem 55a0111-xy in accordance wi th mil-w-22759/32 awg xy (see table) stranded tin plated copper. color: see table. application 1. these parts are designed to provide an environme nt protected shield termination on cables, rated fo r 125 c minimum, meeting the dimensional criteria listed, having tin or silv erplated copper shields. 2. temperature range: -55 c to +150 c. install using raychem-approved convection or in frared heating tools in accordance with raychem pro cess standard rcps-100-70. for best results, prepare the cable as shown: * a trademark of te connectivity. xy = wire gauge (awg) product revision product dimensions cable dimensio ns product name l max ?a min ?b min k min awg ?d max ?e min j 0.5 (j 0.02) color of item 4 d-101-33 j 22 black d-101-34 k 17.0 4.30 5.00 150 22 4.30 1.78 7.00 whi te d-101-35 j (0.670) (0.170) (0.200) (5.900) 20 (0.17 0) (0.070) (0.275) black d-101-36 j 20 white
|
